Types of industrial filters

Types of Industrial Filters Due to the efficiency of dust and air particles:

Filter with a 1 to 2 percent efficiency

Filter with a 1 to 2 percent efficiency

Filter with a 1 to 2 percent efficiency

These three types of filters have the same appearance while using different uses.

On one side of the industrial filter is a silicon tire that, after being installed in the home filter, this silica tire has made the filtering air from being refined from the filter to the filter. Each industrial device uses its related industrial filter depending on their application.

Shield filters, which are one of the types of industrial filters, are used in compressors, and are used as air separators. The media is this type of micro -fiberglass fiber.

This type of filter is used to remove moisture from gas and remove solid particles from gas in industrial machines.
This model is produced in three work classes, namely:

BR> 1 _ 1 _ ۱۰۰ PSI
۱۰ _ _ ۱۰۰ ۱۰۰ ۱۰۰ PSI
_ _ _ ۱۰۰ ۱۰۰ ۱۰۰ ۱ ۱ PSI
Media of this type of cellulosic fiber, micro -fiberglass fibers And the wool is polyester.

Industrial filters are made of bag filters in several models.
Single Ring and a few rings

One soldier and two soldiers

in this type of filter Industrial, in certain conditions, Teflon fibers, below 2 degrees Celsius, use polyester fibers and above 2 degrees Celsius from nomax fibers.

This type of filter is from 1.5 microns to 2 microns.

Micro filters are capable of removing oil from the gas and also removing moisture from the gas, which when the industrial device, to the above fluid Need clean, used.

wash the filter with lukewarm water (half a gram) and some detergent, not to the extent that it foams. Creating a rupture and hole on the filter plate will make this filter unnecessary.
Tap the head of the filter
Blowing from outside the filter, with a maximum of 1 atmosphere